Steps To Fix Roku Error Code 014.50 | Complete Guide

Nowadays, there are many users who troubleshoot Roku Error Codes problems. There are different error codes that Roku shows and each error means a different issue. 

Here in this article, we are going to inform you about Roku Error Code 014.50. We will share the valid reasons and the respective solutions to overcome this problem ASAP. 

Reasons - Roku Error Code 014.50

Let’s begin with the problems causing Roku Error Code 014.50 problems. Basically, the problems responsible are not very hard to fix. 

NOTE: If you will follow the guidelines properly the even you can on your own fix the Roku Error Code 014.50 problem. 

The reasons causing are:

• Wi-Fi is not set correctly. 
• Incorrect credentials can trigger.
• Internal defaults may cause problems. 
• Internet perplexities lead to hurdles. 
• Most of the time, defective wires become a huge issue.

Solutions For Roku Error Code 014.50 | Useful Tips

1. The Router needs to be Restarted

With an internet outage, it is suggested to restart the router as because of internal glitches or bugs the internet stopped working, and as a result; the connection is lost.

If you have a home router and your internet connection is lost, you can take a few steps to get it back.

1. You can either unplug the power cable from behind the router or press the Power button to power it off.
2. Let the power cord sit for a while before plugging it back in.
3. When the router has restarted, press the reset button.

By doing this, you will be able to resolve the error issue by refreshing your internet connection.

2. Check your Wi-Fi Password

You see the Roku error code 014.50 if the Wi-Fi password is not correctly set. Therefore, make sure your password is correct. Roku won't connect to wifi if the password is entered incorrectly. To fix the connection error, enter the correct credentials.

3. Connect to the Internet

A slow or weak internet connection might be to blame if you enter the correct password on Roku but still receive error code 014.50 on Roku. Checking the internet connection should be the next step.

The error can be fixed by stabilizing the network connection if it is found unstable. The error problem can be resolved by stabilizing the network. The router should be placed near the Roku device to ensure stable network connectivity.

It is recommended to use an Ethernet cable over a wireless connection since it is more reliable and stable.

4. Reboot the Roku

Your Roku device can also be rebooted to resolve this error. You can solve this error problem by rebooting your Roku device. The following methods will guide you in restarting your Roku device.

4.1 On Player:

1. Click on Settings.
2. Click System and select System Restart.

4.2 On Roku TV:

1. Go to the TV settings.
2. Select System from the menu.
3. Then select Power.
4. Finally, click Restart System.

5. Check Your Ethernet Cable

The problem may be caused by a damaged or uncertified USB cable if you are using a wired connection. Therefore, use a new or official cable instead of one that is damaged or uncertified. Unofficial Roku cables are insufficient or provide slower network speeds than official Roku cables. As a result, Roku error code 014.50 is now fixed. 

Roku devices can also be damaged by cheap USB cables that supply slow internet. In order to avoid such issues, always use the official USB cable included with the Roku device kit.

In The Conclusion

The information in this article should be helpful to you in solving Roku error code 014.50. The streaming player should now be available to you.